The splicing screens are all over the street, but what should I do when the surface of the LCD splicing screen is dirty? In fact, the dirt on the LCD splicing screen is divided into many kinds, some are dust, some are nail marks left by users accidentally, Oil pollution, etc., we also need to take different methods for different dirt. If we are not careful with the dirt on the surface of the screen, it is very likely that the screen will be stained or corroded. So how should we deal with the LCD splicing screen? what about the dirt?

1. Clean the oil on the screen. If you need to use alcohol, use a special liquid crystal wipe with a little alcohol, and then gently wipe the oily area. After wiping, wipe the screen with a dry towel immediately. Do not touch too much alcohol, alcohol will have a certain corrosive effect on the screen, be sure to wipe the screen with a towel immediately after cleaning.

2. Clean the dust on the screen surface. First of all, we can gently blow air against the screen with our mouth, and gently blow the dust off the screen. For the part of the dust that has not been blown off, use a special LCD wiper to gently wipe the screen. When wiping, pay attention to the small force, and do not use force to wipe on the screen.

3. Clean up the fingerprints on the screen. To clean the fingerprints on the screen, you need to use a special screen cleaner and a special LCD wiper. First, we pour a little of the special LCD splicing screen cleaner onto the special LCD wiper, and then use the special LCD wiper on the screen. Gently wipe the area with fingerprints, and then wipe the screen gently with a dry soft towel.

4. Pay attention to the towel that you choose to be anti-static, otherwise the friction between the towel and the screen will easily cause static electricity, and the towel will easily leave a small amount of fibers on the screen or the raw material of the towel.