As the wave of display technology iteration surges forward, the large-screen display industry is undergoing a profound transformation from "hardware output" to "scene ecology" and from "visual presentation" to "intelligent interaction". In 2026, with the large-scale application of Mini/Micro-LED technology, in-depth integration of AI and display, and the full explosion of scenario-based demand, the industry pattern is accelerating restructuring. Only enterprises with advanced technological insight, full-link R&D capabilities, and scenario-based implementation capabilities can seize opportunities. As a source manufacturer deeply engaged in the LED display field, Stonbel has always taken industry trends as the anchor and technological innovation as the sail, accurately predicting trends, laying out core tracks in advance, and becoming a core force driving industry upgrading with forward-looking strategies and breakthrough technologies.
I. Technological Leap: From High Definition to Super Vision, Locking in the Core Direction of the Next-Generation Display
The iteration of display technology is the core driving force for the large-screen industry. Currently, the industry is accelerating its leap from traditional SMD surface mount technology to a new stage of large-scale Mini-LED, industrialized Micro-LED, and panelized packaging technology. High-end, refined, and integrated development has become an inevitable trend.
1. Innovation in Packaging Technology: COB/MiP Become Mainstream, Panelization Restructures Industrial Value
Traditional SMD technology has obvious shortcomings in ultra-small pitch and high-reliability scenarios. COB (Chip on Board), with its fully enclosed structure, IP67 ultra-high protection, efficient heat dissipation, and ultra-long service life (100,000+ hours), has completely solved water, dust, and impact resistance problems, dominating the market for small pitches below P1.4 with an 85.5% market share in Q3 2025. MiP (Micro Integrated Packaging), compatible with mature production lines and cost-controllable, has become the preferred solution for medium and small pitch and consumer electronics scenarios. These two technologies promote the transformation of LED display from "device assembly" to "panelized manufacturing", concentrating industrial chain value on the midstream module link.
As early as the initial stage of industry transformation, Stonbel predicted the trend of panelized packaging, completed the dual technical layout of COB/MiP 3 years in advance, and built an industry-leading fully automatic panelized production line. Through millimeter-level packaging precision, active drive technology, and efficient heat dissipation design, it achieved the ultimate effect of seam < 0.5mm, flatness error < 0.1mm, and color and brightness consistency > 99%. Its products cover the full pitch range of P0.4-P2.5, meeting both ultra-high-definition needs of command centers and medical imaging, and large-scale scenarios such as commercial displays and conference all-in-ones, with leading technical maturity and market penetration.
2. Breakthrough in Cutting-Edge Technology: Micro-LED and Glass-Based, Laying Out the Future of Ultimate Display
As the industry-recognized "ultimate display technology", Micro-LED has become the core direction of high-end fields such as ultra-micro pitch, AR/VR, and automotive display, relying on self-luminescence, high brightness, wide color gamut, low power consumption, and long service life. Meanwhile, glass-based LED (COG) technology is evolving, with ultra-thin body, high transparency, and active drive characteristics, breaking through traditional PCB substrate bottlenecks to achieve smaller pitches (below P0.4) and better visual experience, becoming the preferred solution for spatial and transparent display.
Adhering to the R&D principle of "looking 3-5 years ahead", Stonbel set up a special Micro-LED R&D team, cooperating with upstream chip manufacturers to tackle core problems such as mass transfer and yield improvement, successfully launching P0.7-P1.2 glass-based Micro-LED texture screen products. It also lays out quantum dot color conversion technology to simplify processes and improve color reproduction, paving the way for Micro-LED large-scale commercialization. Currently, its glass-based products have been mass-produced and applied in high-end commercial exhibition halls and digital art installations, seizing the next-generation display technology high ground.
3. Green and Low-Carbon Upgrade: Deepening Cold Screen Technology, Energy Conservation Becomes Industry Standard
With the doubling of ultra-high-definition large-screen pixel density, power consumption and heat generation have become industry pain points. Green, low-carbon, efficient and energy-saving has changed from an "optional configuration" to an "industry consensus". Cold screen technology is comprehensively deepened: by optimizing driver chips, packaging materials, and heat dissipation structures, power consumption is reduced by 30%-50% under the same brightness, and screen surface temperature is controlled at about 30℃, extending product life and adapting to closed spaces such as medical treatment, office, and home.
Stonbel integrates "green manufacturing" into the entire product life cycle, independently developing energy-saving drive solutions and cold screen heat dissipation systems. All products adopt low-power chips and high-efficiency thermal conductive materials, achieving HDR10 high dynamic range and 3840Hz ultra-high refresh rate with 40% lower energy consumption than industry peers. In 2025, its "cold screen series" products, equipped with AI ambient light adaptive dimming technology, save up to 30,000 kWh of electricity per 1,000 square meters annually, helping customers achieve low-carbon operation in line with the national dual-carbon strategy.
II. Scene Revolution: From Single Display to Spatial Integration, Unlocking a New Ecosystem of Diversified Applications
The large-screen industry has entered a new stage of scenario-based, spatial, and aesthetic development. Display products are deeply integrated into architecture, commerce, cultural tourism, government affairs, and home furnishing, transforming from "visual carriers" into "core of spatial aesthetics and intelligent interaction portals". ISLE 2026 data shows that innovative products such as texture screens and transparent screens have experienced explosive growth, with scenario-based customized demand exceeding 70%, and the industry shifting from "selling products" to "selling solutions and scene experiences".
1. Texture Screens: Reshaping Spatial Aesthetics, Realizing "Symbiosis between Screens and Architecture"
As a pioneer in texture screen technology, Stonbel launched R&D in 2023. Relying on independently developed surface micro-structure technology and a customized texture database, it has launched four series of texture screen products (stone grain, wood grain, cloth grain, metal grain), covering P0.9-P2.0 pitches and supporting arbitrary size and special-shaped customization. With texture fidelity > 95%, color reproduction > 98%, and IP65 protection level, its products have been applied in high-end hotel lobbies and villa living rooms in major cities, leading the industry trend of "display as decoration".
2. Innovative Form Display: Breaking Physical Boundaries to Meet Diversified Creative Needs
Stonbel has built a "full-form display product matrix" with R&D and manufacturing capabilities for all the above products. Its independently developed flexible COB technology achieves curved display with a minimum radius of 500mm and flatness error < 0.08mm; its transparent screen (85% transmittance) supports double-sided display and remote control, applied in chain brand shop windows and auto 4S stores; its special-shaped screens serve concerts and theme parks, helping customers create differentiated effects with top-tier market share.
3. AI + Display Integration: From Passive Display to Intelligent Interaction, Opening a New Intelligent Scenario
Stonbel took the lead in laying out the "LED + AI" strategy, building a three-layer technical system. Its independently developed AI display control system supports voice interaction and gesture recognition with ≤ 1 second delay; its AI conference all-in-one machine realizes automatic voice transcription and remote collaboration, improving efficiency by 50%; its AI energy-saving advertising screen improves conversion rate by 40% through pedestrian flow perception. Currently, its AI display products cover smart office, commercial retail, and smart cities, becoming an AI landing benchmark.
III. Forward-Looking Layout: Stonbel's Industrial Insight and Core Competitiveness
Stonbel's leading position in the industry stems from four core competencies: accurate trend prediction, full-link technical layout, large-scale manufacturing strength, and scenario-based service capabilities, leading dual upgrading of industry technology and market.
1. Trend Prediction: Layout 3-5 Years in Advance to Seize Industry Opportunities
Stonbel's core R&D team, with over 20 years of industry experience, adheres to the strategy of "R&D one generation, reserve one generation, and mass produce one generation". As early as 2020, it predicted the trends of COB panelization, texture screens, and AI + display, investing in R&D and patents in advance. It took the lead in mass-producing texture screens and glass-based LEDs in 2023, and completed Micro-LED pilot test and AI display full-scenario landing in 2025, accurately following industry rhythms as a trend predictor and leader.
